A boat cover is an inexpensive way to protect your fishing boat against harmful UV rays, rain, bird dropping, and other debris with one of these quality boat covers from Bass Pro Shops, West Marine, Boaters Worlds, and other quality suppliers. A boat cover will keep out moisture, to prevent mildew and mold, and helps keep rodents, birds, and other small animals from getting in and damaging your boat. Covers prevent leaves, dirt, and other airborne debris from getting in and covering your boat with a layer of grime.
These are the best boat covers available. They are suitable for storage/mooring as well as trailering.
The cover is made from marine grade polyester. The cover is made from 7.8 oz/600d/600 denier solution dyed polyester. 600d is an indirect measurement of density and weight. The higher the number, the heavier, thicker, and heavier duty. This is the thickest cover you will find. You will see a lot of 300d, even 150d covers, which are proportionally half as thick and 1/4 as thick as our covers.
The fabric is then coated twice with polyurethane on the bottom or downside, UV protected, and mildew protected.
What this all adds up to is the best cover available. It is nearly twice as thick as what you see readily available commercially. It is designed to keep water out, as it is WATERPROOF. Yet, water vapor can permeate it, so it will keep moisture out, but will not keep moisture in!
Our covers come with tie down/hold down straps, as well as a storage bag. For certain applications, such as higher speed trailering, you may need to add extra straps. The material is heavy duty enough to support any reasonalbly paced trailering. These also have elastic around the bottom, for super snug fit.
This particular unit will fit a v hull type boat..such as a fishing boat, runabout, ski boat, etc that is between 14 and 16 ft long, with a maximum beam of 90" So, if you boat is 65" wide at the widest, this cover would cover the top of the boat, plus (90-65)/2 = 12 1/2" on each side..so, you would cover roughly one foot down each side of the boat...will hold pretty tight with the elastic, and you can strap it down with the included stratps if you need to! These are nice covers!
This is not a disposable type cover. It is made for years and years of use. It has a 5 year warranty.
These are the best boat covers available. They are suitable for storage/mooring as well as trailering.
The cover is made from marine grade polyester. The cover is made from 7.8 oz/600d/600 denier solution dyed polyester. 600d is an indirect measurement of density and weight. The higher the number, the heavier, thicker, and heavier duty. This is the thickest cover you will find. You will see a lot of 300d, even 150d covers, which are proportionally half as thick and 1/4 as thick as our covers.
The fabric is then coated twice with polyurethane on the bottom or downside, UV protected, and mildew protected.
What this all adds up to is the best cover available. It is nearly twice as thick as what you see readily available commercially. It is designed to keep water out, as it is WATERPROOF. Yet, water vapor can permeate it, so it will keep moisture out, but will not keep moisture in!
Our covers come with tie down/hold down straps, as well as a storage bag. For certain applications, such as higher speed trailering, you may need to add extra straps. The material is heavy duty enough to support any reasonalbly paced trailering. These also have elastic around the bottom, for super snug fit.
This particular unit will fit a v hull type boat..such as a fishing boat, runabout, ski boat, etc that is between 14 and 16 ft long, with a maximum beam of 90" So, if you boat is 65" wide at the widest, this cover would cover the top of the boat, plus (90-65)/2 = 12 1/2" on each side..so, you would cover roughly one foot down each side of the boat...will hold pretty tight with the elastic, and you can strap it down with the included stratps if you need to! These are nice covers!
This is not a disposable type cover. It is made for years and years of use. It has a 5 year warranty.
These are the best boat covers available. They are suitable for storage/mooring as well as trailering. The cover is made from marine grade polyester. The cover is made from 7.8 oz/600d/600 denier solution dyed polyester. 600d is an indirect measurement of density and weight. The higher the number, the heavier, thicker, and heavier duty. This is the thickest cover you will find. You will see a lot of 300d, even 150d covers, which are proportionally half as thick and 1/4 as thick as our covers. The fabric is then coated twice with polyurethane on the bottom or downside, UV protected, and mildew protected. What this all adds up to is the best cover available. It is nearly twice as thick as what you see readily available commercially. It is designed to keep water out, as it is WATERPROOF. Yet, water vapor can permeate it, so it will keep moisture out, but will not keep moisture in! Our covers come with tie down/hold down straps, as well as a storage bag. For certain applications, such as higher speed trailering, you may need to add extra straps. The material is heavy duty enough to support any reasonalbly paced trailering. These also have elastic around the bottom, for super snug fit. This particular unit will fit a v hull type boat..such as a fishing boat, runabout, ski boat, etc that is between 14 and 16 ft long, with a maximum beam of 90" So, if you boat is 65" wide at the widest, this cover would cover the top of the boat, plus (90-65)/2 = 12 1/2" on each side..so, you would cover roughly one foot down each side of the boat...will hold pretty tight with the elastic, and you can strap it down with the included stratps if you need to! These are nice covers! This is not a disposable type cover. It is made for years and years of use. It has a 5 year warranty.
These are the best boat covers available. They are suitable for storage/mooring as well as trailering. The cover is made from marine grade polyester. The cover is made from 7.8 oz/600d/600 denier solution dyed polyester. 600d is an indirect measurement of density and weight. The higher the number, the heavier, thicker, and heavier duty. This is the thickest cover you will find. You will see a lot of 300d, even 150d covers, which are proportionally half as thick and 1/4 as thick as our covers. The fabric is then coated twice with polyurethane on the bottom or downside, UV protected, and mildew protected. What this all adds up to is the best cover available. It is nearly twice as thick as what you see readily available commercially. It is designed to keep water out, as it is WATERPROOF. Yet, water vapor can permeate it, so it will keep moisture out, but will not keep moisture in! Our covers come with tie down/hold down straps, as well as a storage bag. For certain applications, such as higher speed trailering, you may need to add extra straps. The material is heavy duty enough to support any reasonalbly paced trailering. These also have elastic around the bottom, for super snug fit. This particular unit will fit a v hull type boat..such as a fishing boat, runabout, ski boat, etc that is between 17 and 19 ft long, with a maximum beam of 96" So, if you boat is 72" wide at the widest, this cover would cover the top of the boat, plus (96"-72")/2 = 12" on each side..so, you would cover roughly one foot down each side of the boat...will hold pretty tight with the elastic, and you can strap it down with the included stratps if you need to! These are nice covers! This is not a disposable type cover. It is made for years and years of use. It has a 5 year warranty.
These are the best boat covers available. They are suitable for storage/mooring as well as trailering.
The cover is made from marine grade polyester. The cover is made from 7.8 oz/600d/600 denier solution dyed polyester. 600d is an indirect measurement of density and weight. The higher the number, the heavier, thicker, and heavier duty. This is the thickest cover you will find. You will see a lot of 300d, even 150d covers, which are proportionally half as thick and 1/4 as thick as our covers.
The fabric is then coated twice with polyurethane on the bottom or downside, UV protected, and mildew protected.
What this all adds up to is the best cover available. It is nearly twice as thick as what you see readily available commercially. It is designed to keep water out, as it is WATERPROOF. Yet, water vapor can permeate it, so it will keep moisture out, but will not keep moisture in!
Our covers come with tie down/hold down straps, as well as a storage bag. For certain applications, such as higher speed trailering, you may need to add extra straps. The material is heavy duty enough to support any reasonalbly paced trailering. These also have elastic around the bottom, for super snug fit.
This particular unit will fit a v hull type boat..such as a fishing boat, runabout, ski boat, etc that is between 17 and 19 ft long, with a maximum beam of 96" So, if you boat is 72" wide at the widest, this cover would cover the top of the boat, plus (96"-72")/2 = 12" on each side..so, you would cover roughly one foot down each side of the boat...will hold pretty tight with the elastic, and you can strap it down with the included stratps if you need to! These are nice covers!
This is not a disposable type cover. It is made for years and years of use. It has a 5 year warranty.
These are the best boat covers available. They are suitable for storage/mooring as well as trailering.
The cover is made from marine grade polyester. The cover is made from 7.8 oz/600d/600 denier solution dyed polyester. 600d is an indirect measurement of density and weight. The higher the number, the heavier, thicker, and heavier duty. This is the thickest cover you will find. You will see a lot of 300d, even 150d covers, which are proportionally half as thick and 1/4 as thick as our covers.
The fabric is then coated twice with polyurethane on the bottom or downside, UV protected, and mildew protected.
What this all adds up to is the best cover available. It is nearly twice as thick as what you see readily available commercially. It is designed to keep water out, as it is WATERPROOF. Yet, water vapor can permeate it, so it will keep moisture out, but will not keep moisture in!
Our covers come with tie down/hold down straps, as well as a storage bag. For certain applications, such as higher speed trailering, you may need to add extra straps. The material is heavy duty enough to support any reasonalbly paced trailering. These also have elastic around the bottom, for super snug fit.
This particular unit will fit a v hull type boat..such as a fishing boat, runabout, ski boat, etc that is between 14 and 16 ft long, with a maximum beam of 90" So, if you boat is 65" wide at the widest, this cover would cover the top of the boat, plus (90-65)/2 = 12 1/2" on each side..so, you would cover roughly one foot down each side of the boat...will hold pretty tight with the elastic, and you can strap it down with the included stratps if you need to! These are nice covers!
This is not a disposable type cover. It is made for years and years of use. It has a 5 year warranty.
These are the best boat covers available. They are suitable for storage/mooring as well as trailering.
The cover is made from marine grade polyester. The cover is made from 7.8 oz/600d/600 denier solution dyed polyester. 600d is an indirect measurement of density and weight. The higher the number, the heavier, thicker, and heavier duty. This is the thickest cover you will find. You will see a lot of 300d, even 150d covers, which are proportionally half as thick and 1/4 as thick as our covers.
The fabric is then coated twice with polyurethane on the bottom or downside, UV protected, and mildew protected.
What this all adds up to is the best cover available. It is nearly twice as thick as what you see readily available commercially. It is designed to keep water out, as it is WATERPROOF. Yet, water vapor can permeate it, so it will keep moisture out, but will not keep moisture in!
Our covers come with tie down/hold down straps, as well as a storage bag. For certain applications, such as higher speed trailering, you may need to add extra straps. The material is heavy duty enough to support any reasonalbly paced trailering. These also have elastic around the bottom, for super snug fit.
This particular unit will fit a v hull type boat..such as a fishing boat, runabout, ski boat, etc that is between 20 and 22 ft long, with a maximum beam of 100" So, if you boat is 72" wide at the widest, this cover would cover the top of the boat, plus (100-72)/2 = 14" on each side..so, you would cover roughly one foot down each side of the boat...will hold pretty tight with the elastic, and you can strap it down with the included stratps if you need to! These are nice covers!
This is not a disposable type cover. It is made for years and years of use. It has a 5 year warranty.
